FAQ
Will Easy Clean really remove yellow waterline staining? I have heard these claims before.
Yes, Easy Clean was designed specifically to remove this type of staining.
In the past I had to wet and dry the hull to remove yellow staining. How does Easy Clean work?
Easy Clean works by entering the microscopic pores in the gelcoat and removing the bacteria which cause discolouring.
I have black engine exhaust stains on my boat, will Easy Clean remove this?
Yes, as with yellow staining, exhaust staining will also be removed.
Is Easy Clean a polish as well as a cleaner?
No, Easy Clean is a deep intensive cleaner.
Is Easy Clean really that easy to use?
Yes, just spray it on, leave for 15 minutes and then wash off with a sponge or cloth using plenty of water.
Do I need to use a special type of polish after the application of Easy Clean?
No, polish your boat with your preferred polish.
Do I have to spray Easy Clean on?
Easy Clean can be applied by bush, or spray, whichever is more suited to your needs.
Is Easy Clean temperature sensitive?
Easy Clean can be used in temperatures under 10 degrees centigrade, however it is advisable in this circumstance to leave the product on the gelcoat for a longer period of time. Do not allow Easy Clean to freeze.
I have black rubber/tyre marking on my hull, will Easy Clean remove this?
Yes, although depending on the severity of the marking you may need to make a second application.
Will Easy Clean remove rust staining?
Yes, Easy Clean is particularly good at cleaning up stainless steel and anchor rust staining on hulls.
I have non-slip decks, can I use Easy Clean on them?
Yes, apply Easy Clean in the normal manner and sluice with plenty of water.
(C)
2009 Avant Supplies Ltd, Brightlingsea, Essex
| Last updated 04/10/09